Vehicles
124 not categorized PORSCHE CAYENNE RING PISTONCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.SIC10318910 2 / 2 4l with kolbenschmidt pistons 911 1970-1973 84mm-1 50, 2 00, 5 00
From $203.50
Make a selection
From $167.36
Make a selection
$167.36
Make a selection
From $297.06
Make a selection
$207.90
Make a selection FA500955 The new fortune auto generation 5 internal floating piston is considerably lighter and uses a low-drag teflon band that drastically reduces stiction. This allows the damper to react quicker to shock forces. The fortune auto 500 series damper shaft seals have 40% less drag than our previous models. This provides for less hysteresis and for superior control of driver inputs. Our new seals are made of a specially formulated buna rubber compound that provides a great balance between reliability and performance! Since the shaft seal is the most important seal on the shock, a stronger seal will greatly improve quality and performance.shims are deflection disks that cover up the port holes on a piston. They regulate t...(choose a part on the right to read more) General FitmentCAYENNE 2003-06
$1,956.15
Make a selection FVD123045AT FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos. General FitmentCAYENNE 2011-14CAYENNE 2007-10
$2,432.70
Make a selection 10010303204 - 3.2 l for increased horsepower and torque.* - genuine mahle forged pistons with deeper valve pockets. - genuine mahle steel (st52) nikasil coated cylinders.** - piston pin bore is off center (deaxiated) for factory quiet operation. - 10.3:1 compression. - 98 mm big bore. - 22x58 racing wrist pins - 70.4 stroke. - made in Germany by mahle gmbh. - piston rings installed directly on the pistons for ease of installation. - complete set with cylinders, pistons, rings, wrist pins and clips. - kit weighs 21.03 lbs. (9.54 kg). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resista...(choose a part on the right to read more)
$9,693.51
Make a selection 10010303200 Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty. General Fitment930 1975-77911 1978-83 911 1974-77
$8,394.22
Make a selection 10010303400 Every piston and cylinder is complete and ready to be installed. They are packed as complete set for every engine. Carefully read our technical information before installing the parts. Piston rings and piston pins must not be modified. Modifications of any of these parts will void the manufacturers warranty. General Fitment911 1984-86911 1987-89
$8,799.12
Make a selection 10010303802 Perfect kit for street use, this is ultra-reliable, factory smooth kit will yield 35+ hp (depending on your additional modifications). These can also be used with OEM valves and camshafts. These are slip fit (107 spigot / 102 bore) and no modifications must be made to the case. Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have the piston rings (sealing and oil scrapers) pre-installed to ensure reliability. Each of our mahle piston and cylinder kits are complete and ready for installation. We also ...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $6,080.40
Make a selection 83789680071 Stoptech big brake kit front slotted red caliper Porsche 996 Carrera s 2005 General Fitment911 2005-08
$3,882.60
Make a selection 10010303804 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's have very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 40+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have ...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $6,080.40
Make a selection 100103038TU997 Mahle 3.8 liter piston and cylinder conversion kit for 996/997 turbo / GT2 & GT2 rs - increased horsepower and torque.* - forged pistons with deeper, mirrored valve pockets with 23 mm wrist pin. - slip fit, steel (st52) cylinders. - piston pin bore is off center (deaxiert) for factory quiet operation. - 9.4:1 compression. - 102 mm bore. - piston rings installed directly on the pistons for ease of installation. - made in Germany by mahle gmbh. *please note: horsepower and torque gains depend on the software used, camshafts, crankshaft and other internal modifications. 700+ hp and torque can be achieved with use of these pistons and cylinders with a proper engine build and software. Contact your sales person for ...(choose a part on the right to read more) General Fitment911 TURBO/GT2 2001-05911 TURBO/GT2 2007-09
$14,654.60
Make a selection 100174094 The name mahle is synonymous with both Porsche and performance. From the engineering of the world’s first aluminum alloy piston, to the development of the nikasil coated cylinders (nikasil is the wear-resistant cylinder coating now used throughout the industry), the mahle tradition powers not only Porsche street cars, but also today’s most advanced Porsche racecars. If you want more horsepower out of a daily driver, or ultimate performance for a full-on racecar, mahle pistons and cylinders can handle it. These cylinder and piston sets feature nikasiltm coated cylinders which reduce wear and a matched aluminum piston in several different compression rations. Includes rings and wrist pins. General Fitment911 1974-77
$850.00
Make a selection 10010303803 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. However, this kit cannot be used with original cams, it requires a more aggressive cam (maximum valve lift (tdc) of 2.1 mm) and has very deep pockets for use with rsr valves. The 109-mm size means that the housings / case must be modified / machined on non rs models. If you have a European rs model, these would be slip fit. This kit also requires 6 qty. Larger o-rings, part # 96410440180 and 6 qty. Larger base o-rings, part # 99970502341 mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high th...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $6,784.84
Make a selection 10395 Auto atlanta now offers offer nickies™ cylinders and specially matches je pistons for your 911 air-cooled engine. The nsc-plated, cnc billet solid aluminum cylinders provides increased strength, ductility and cooling ability which reduces head and oil temperatures. They also feature half-mooned windage-notched skirts for increased horsepower. Custom-made, specially match je pistons feature an “ultra-quench” dish shape that offer a faster burn for better thermal efficiency, leading to better gas mileage, lower potential for detonation, and best of all, more power. Please state your bore size and compression ratio when ordering. General Fitment911 1978-83
$99,999.00
Make a selection 13271016 For all the Porsche drivers looking to replace their old standard suspension in their used "987", or for anyone who would like to increase their driving dynamics, st suspension now have the st x coilovers available. In addition to the tested and continuous lowering of up to 60 mm (1.2"-2.4"), the st suspension developed by kw allows you to further increase the handling and excellent road holding of the mid-engine Porsche Boxster and Porsche Cayman.once installed, the st x coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles. For lower...(choose a part on the right to read more) General FitmentBOXSTER 2005-08
$1,376.66
Make a selection 10398 Autoatlanta now offers offer nickies™ cylinders and specially-matches je pistons for your 911 aircooled engine. The nsc-plated, cnc billet solid aluminum cylinders provides increased strength, ductility and cooling ability which reduces head and oil temperatures. They also feature half-mooned windage-notched skirts for increased horsepower. Custom-made, specially match je pistons feature an “ultra-quench” dish shape that offer a faster burn for better thermal efficiency, leading to better gas mileage, lower potential for detonation, and best of all, more power. Please state your bore size and compression ratio when ordering. General Fitment911 1984-86911 1987-89
$99,999.00
Make a selection 1069963 This Boxster s/ Cayman s 3.4-3.6l je piston set enlarges the bore while maintaining proper quench, which allows for faster burn and better thermal efficiency, leading to better gas mileage, lower potential for detonation, and more power by retaining the factory inverted dome piston shape, mirroring the pent-roof four-valve combustion chamber! These pistons are as strong as the forged pistons found on “s” engines, but use a lightweight forged side relief design for improved strength while being lighter than the factory pistons. Includes rings, pins, & clips. General FitmentBOXSTER 2005-08CAYMAN 2006-08
$99,999.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |